LW Vertical not clogging sewage pump is used to transfer the waste
water with fiber diameter 5 times as pump diameter or the solid
particles diameter 50 percent as the pump diameter. LW vertical not
clogging sewage pump adopts a unique single (double) channel
impeller and improves the sewage discharge for the not clogging.
LW sewage pump has two structural forms. One is the motor and pump
directly connected coaxial and the other is the use of coupling
connection. The motor adopts a standard vertical motor. Its
structure diagram is as follows. Each structure form has two base
connection forms. One is the horizontal suction of the inlet and
has the function of turning Angle. It can be used according to the
requirements .Even the outlet Angle can be set to 0., 90., 180,
270, easy to connect the pipeline and the other is the inlet axial
suction and belongs to vertical installation.
1. The not clogging impeller with big flow channel can transfer the
waste water with fiber diameter 5 times as pump diameter or the
solid particles diameter 50 percent as the pump diameter.
2. The motor with high efficiency and energy saving
3. Single face mechanical seal( tungsten carbide material has the
advantages of wear-resisting and corrosion-resisting etc) can
continuously work more than 8000 hours.
4. LW pump is directly connected with motor by the shaft and the
equipment structure is compact and discharging performance is
5. The advanced mode with high efficiency and low noise etc.
6. When the motor is with protective sleeve and the pump can be
used outdoor without pump room. So the use cost for the pump is
7. LW pump and motor is as the whole structure for the convenient
Irrigation and drainage fields and various water conservancy
projects, all kinds of farms, slaughter houses, slaughter yard,
septic tank, etc and Municipal engineering, construction site.
Performance range for LW pump:
Flow rate:5 to 3600m3/h
Head: 5 to 60m
Speed: 980 to 2900r/min
Pump inlet and outlet: DN25 to DN500
Working pressure is not more than 1.0MPa